How to Choose Wholesale Headlight From China?
Suitable for reading, up-close repair work, and general camp tasks. Wholesale headlamps with flood beams rarely project light over a significant distance.
Narrow, focused, or a spot: The best way to see far away is through this narrow beam. When it comes to navigating a trail at night, this is typically the better option.
Flood/Spot: The most adaptable headlamps are adjustable ones.
Wholesale Headlight Output (Lumens) A light source’s total output of light in all directions is measured in lumens, a unit of measurement.A light with a higher lumen count typically uses more energy than a light with a lower lumen count.
So, the wholesale headlight is brighter the more lumens it has? Yes, usually, but not always. The utilization of those lumens can be affected by the wholesale headlight manufacturer’s ability to focus and direct the wholesale light.
Beam Distance of a wholesale headlight The primary function of a headlamp is to direct light toward a specific location. The distance (in meters) that a headlamp can project light that can be used is tested. Headlamp beam distance indicates how far a headlamp travels (to a surface you wish to be illuminated), whereas lumens indicate how brightly a headlamp glows at its source.
Wholesale headlamp Run Time This information tells you how long your headlamp will last after it has been fully charged. However, the headlamp industry has recently started changing how this is measured, so if you compare two headlamps, you might see some numbers that are hard to understand.
This is why: At 2 meters, manufacturers once measured a headlamp’s run time until it no longer produced usable light—the light of a full moon. As the point at which a light’s run time comes to an end, the new standard uses 10% of the light’s original brightness. Under the old standard, for instance, a 350-lumen headlamp might have a 40-hour lifespan.
However, the same headlamp might only last for two hours under the new standard. Even though the illumination level is reduced, it should still provide an additional 38 hours of illumination.)Therefore, if you find two headlamps that appear to be similar but have drastically different run times, one of them may not have been tested with the new standard yet.
Modes and Brightness Levels for wholesale Headlights The majority of headlamps have at least one high and low mode. Some may provide three or more options.
The strobe (also known as flash) mode of wholesale headlight serves as an emergency blinker. Some models even come with a selection of flash rates: fast and slow.
Low is the default setting for most activities, like doing camp chores or walking along a smooth trail at night.
On some models, mid is available to give customers more options.
When you just need or want more light, High (or Max) is a good choice.
When you really want to know what’s causing that rustling sound in those nearby bushes, this feature lets you project an extra-intense beam for maybe 10-20 seconds. Just be aware that this mode uses a lot of batteries.