Some Tips Preserving Outdoor Light Strings

Use wholesale string light, before putting any light strings outside, always check the safety rating to make sure they are safe for use outside. Outdoor and indoor use of rope lights, patio lights, and many Christmas lights are safe. These lights can withstand the elements because they are made of stronger materials. However, some Christmas light strings are only suitable for indoor use. When used outdoors, these lights may prematurely fail or even short out if they come into contact with water.

Don’t Use Worn or Old wholesale string lights When was the last time you bought new Christmas display light strings? If it has been a while or if your lights are kept in a hot attic for more than 10 months of the year, you may need new ones. You should use testers to look for faulty bulbs, blown fuses, or damaged sockets when you first turn off your lights and make any necessary repairs. Because these lights could potentially present a fire hazard, strings that have wires that are worn or brittle should be discarded immediately.

Use Bulbs with an Outdoor Rating While the majority of C7 and C9 bulbs are safe for outdoor use, other types of bulbs used in patio light strings are not. As long as they are kept out of the water, incandescent bulbs can be used outdoors safely. The wholesale string light should be taken down immediately following an event if they are used in an open area. Depending on the safety rating, LED bulbs can be used anywhere. Where moisture is present, damp location-rated bulbs can be used, but they should not come into direct contact with water. The use of LED bulbs with this rating for permanently attached light strings is not recommended. Bulbs with a “wet location” rating are safe to use in open spaces and can come into direct contact with water.

Only use extension cords rated for the Outdoors Extension cords must be rated for the outdoors just like the wholesale string light themselves. The thicker insulation of outdoor extension cords is designed to withstand wetter and rougher conditions.

You will need to check the rating code that is directly stamped on the cord in order to determine whether or not it is suitable for use outdoors. This code, which is made up of letters, is used to explain what the cord jacket is made of and what it can handle. Only Cut Light Strings Designed to be Cut Not all string lights are designed to be cut or shortened. In the code, an outdoor-rated cord will have the letter “W.”Outdoor light strings are designed to be connected end to end thanks to their male and female end plugs.

The safety rating of these wholesale string lights is void when they are shortened, and doing so may render the string useless. There are patio wholesale string light that can be cut to any length you want without end plugs. The sockets on commercial Christmas light stringers and spools are already attached and can be shortened as needed. Utilize bulk wire for a truly individual Christmas light

arrangement. There are no end plugs or sockets on this wire, so you can choose where it goes. Because sockets and end plugs must match, be sure to pay attention to the type of wire. The jacket on SPT-1 wire is thin, while the jacket on SPT-2 wire is thicker.SJTW wire, which is made of thermoplastics and is designed for outdoor use, is used in some patio strings. Rope wholesale string light spools made of LED or incandescent light bulbs can only be cut at the cutting points indicated by a white dashed line. The rope light will fail if cut anywhere else. In contrast, rope light kits lack cutting marks and have predetermined lengths. These lights won’t work if they are cut, and there is no way to attach them.